Tracing Cable

	Industrial Segment
	Heating Cables
	Heat Tracers-Cut to Length
	Heat Tracers-Factory Terminated
	Self Regulating Cables
	Self Trace STF
	Self Trace STP
	Heated Hoses
	Silicon Heating Panels
	Heating Jackets
	Insulation Pads
	Drum Heaters
	Heating Mantles
	Anti-condensation & Defrost Heaters
	Domestic Segment
	Commercial Segment

Self Trace STF

– For freeze protection in pipes

STF is a self-limiting heating tape for applications for freeze protection applications in pipelines. STF comprises of the inner insulation of TPE material and outer jacket of Fluoropolymer/TPE.

Construction

1)	Buswires

2)	Semi conductive heating core extruded over bus wire

3)	TPE Insulation

4)	Coated copper braid to give a continuous ground path.

5)	Outer jacket of TPE to enable use in corrosive areas.

Technical Specifications

Catalogue Reference	STF15	STF20
Heating Power W/m (230V AC) at 10 C	15	20
Voltage Supply	230VAC, 50Hz, 120VAC on request
Min. Installation Temperature	-40 deg C
Application Temperature up to	-40 deg C
Operating Temperature – Switched on	Max 65 deg C
Operating Temperature- Switched off	Max 85 deg C (1000 hours cumulative)
Minimum Bending Radius	25mm
Circuit Breaker	Max. 30 A (C type)

Heating Power

Product Range, Circuit Breaker Selection & Maximum Length

Voltage AC 230 V			STF15			STF20
Breaker size		A	16	20	30	16	20	30
Start-up temperature	10 ºC	M	145	162	-	116	140	-
	-15 ºC	M	93	125	160	75	93	140
	-20 ºC	M	82	111	160	62	85	115