Tracing Cable

	Industrial Segment
	Heating Cables
	Heat Tracers-Cut to Length
	Heat Tracers-Factory Terminated
	Self Regulating Cables
	Self Trace STF
	Self Trace STP
	Heated Hoses
	Silicon Heating Panels
	Heating Jackets
	Insulation Pads
	Drum Heaters
	Heating Mantles
	Anti-condensation & Defrost Heaters
	Domestic Segment
	Commercial Segment

Self Trace STP

– For high temperature applications

STP is a self limiting tracer suitable for high temperature applications up to 120 C. STP allows steam cleaning in pipes. The insulation and the outer jacket of the STP are made of fluoropolymers capable of withstanding high temperatures and providing protection against chemicals & abrasion.

Construction

1)	Buswires

2)	Semi conductive heating core extruded over bus wire

3)	Fluoropolymer Insulation

4)	Coated copper braid to give a continuous ground path.

5)	Outer jacket of Fluoropolymer to enable use in corrosive areas.

Technical Specifications

Catalogue Reference	STP20	STP30	STP45
Heating Power W/m (230V AC) at 10⁰C	20	30	45
Voltage Supply	230VAC, 50Hz, 120VAC on request
Min. Installation Temperature	-40⁰C
Application Temperature up to	-60⁰C
Operating Temperature – Switched on	Max 120⁰C
Operating Temperature- Switched off	Max 190⁰C (1000 hours cumulative)
Minimum Bending Radius	25mm
Circuit Breaker	Max. 30 A (C type)

Heating Power

Circuit Breaker Selection and Maximum Lengths

Voltage AC 230 V			STP20			STP30			STP45
Breaker size		A	16	20	30	16	20	30	16	20	30
Start- up temperature	10 ºC	M	135	160	-	85	114	-	70	82	-
Start- up temperature	-25 ºC	M	100	130	160	69	92	114	49	66	82